Recovery and Use of Continuous Fibers (r-Rovings) Through the Recycling of Hydrogen Tanks

REINFORCE | Continuous Fiber Recycling in Case of Hydrogen Tanks

The key innovation in this project is the recovery of recycled carbon fibers in the form of continuous fibers known as r-roving. By preserving the fiber length, the recycled fibers can, in principle, be used in the same applications as virgin fibers. The goal is to investigate and enable a 1:1 replacement of virgin fibers with recycled fibers.

Recycling CFRP typically requires a shredding step. In this process, the material is broken down into small pieces using shredding equipment. The main challenge here lies in producing material with sufficient purity, fiber length, strength, and homogeneity. Furthermore, mechanical recycling alone cannot satisfactorily separate the fibers from the matrix. To recover recycled carbon fibers ranging from several millimeters to centimeters in length and free of matrix residues, an additional fiber-matrix separation step is necessary. Pyrolysis or solvolysis processes, for example, can be used for this purpose. However, further processing of recycled carbon fibers—such as winding or braiding—cannot be carried out with discontinuous carbon fibers, as obtained by state-of-the-art processes, without a labor-intensive yarn manufacturing process. This project therefore aims to recover continuous filaments and reuse them in their continuous form. The innovative approach of this project thus consists of recovering continuous filaments from hydrogen tanks. A winding mandrel developed by TUM for initial trials is shown in Figure 1. This mandrel is used for initial recycling trials involving pyrolysis followed by oxidation; a recovered r-roving is shown in Figure 2, which is then impregnated on the towpreg line at Kümpers GmbH and further processed into rCF towpregs.

© Fraunhofer IGCV
Figure 1: Prototype developed by the Technical University of Munich following pyrolysis at the Fraunhofer IGCV
© Fraunhofer IGCV
Abbildung 2: Wiedergewonnener r-Roving nach der Batch-Oxidation am Fraunhofer IGCV für nachfolgende Imprägnierversuche bei Kümpers
© Kümpers GmbH
Figure 3: Towpreg winding system for the impregnation of recycled rovings at Kümpers GmbH

Project Objectives

 

In this project, the recycled rovings (r-rovings) are unwound after the polymer matrix has been removed, inspected for quality, and processed—for example, through resizing—so that they can be reused as a substitute for virgin fibers. As the project progresses, larger, application-specific pressure tanks will be recycled, and the rCF tow preforms will be reused.

In addition to the use of recycled carbon fibers as continuous fibers, Fraunhofer IGCV also focuses on their use as discontinuous fibers in the form of wet nonwovens.

 

Additional projects can be found on the overview page on composite recycling.