Locations and Directions

  • Information about the location

    The technology center in Augsburg is the main location of the Fraunhofer IGCV.

    Fraunhofer Institute for Casting, Composite and Processing Technology IGCV

    Headquarters: Am Technologiezentrum 2 | 86159 Augsburg

    +49 (0) 821 / 90678-0 | info@igcv.fraunhofer.de

    Further information about the building

    Directions

    By Car

    Navigation system: If "Am Technologiezentrum" is unknown, select "Ecke Hugo-Eckener-Straße /Bürgermeister-Ulrich-Straße" as your destination. Coming from the A8, at the Augsburg-West junction take the B17 towards Landsberg. At the WWK- Arena take the 2nd exit (Haunstetten-Nord) and turn right into "Bürgermeister-Ulrich-Straße". Follow this road until you reach a traffic circle after about 1 km. There you take the 3rd exit over the streetcar tracks. The destination is on the right hand side, first entrance. Look for the Fraunhofer IGCV logo, our entrance is on the left side of this building. Parking spaces are available directly in front of the building.

    By Public Transport

    Take tram line 3 (from the main station in the direction of "Haunstetten West"; via "Königsplatz" and "Haunstetter Straße") to the stop "Landesamt für Umwelt". From there you can already see the building with Fraunhofer IGCV lettering.  

     

    Directions »Technologiezentrum«

    Detailed directions TZ2 and TZ10
    © Fraunhofer IGCV
  • Information about the location

    Fraunhofer Institute for Casting, Composite and Processing Technology IGCV

    Location: Am Technologiezentrum 10 | 86159 Augsburg

    +49 (0) 821 / 90678-0 | info@igcv.fraunhofer.de

    Directions

    By car

    Navigation system: If "Am Technologiezentrum" is unknown, select "Ecke Hugo-Eckener-Straße /Bürgermeister-Ulrich-Straße" as your destination. Coming from the A8, at the Augsburg-West junction take the B17 towards Landsberg. At the WWK- Arena take the 2nd exit (Haunstetten-Nord) and turn right into "Bürgermeister-Ulrich-Straße". Follow this road until you reach a traffic circle after about 1 km. There you take the 3rd exit over the streetcar tracks.Follow the road until after the left-hand bend. The building is on the right hand side, look for the Fraunhofer IGCV logo. Parking spaces are available in the parking garage on the left side of the building. Please note that the entrance is only possible up to a vehicle height of 2 meters.

    By public transport

    Take tram line 3 (from the main station in the direction of "Haunstetten West"; via "Königsplatz" and "Haunstetter Straße") to the stop "Landesamt für Umwelt". In northern direction you will see our main building with Fraunhofer IGCV logo. Walk straight ahead past the building "Technologiezentrum Augsburg" towards the west. Our location "Am Technologiezentrum 10" is directly in front of you, look for the Fraunhofer IGCV logo.

    Directions »Technologiezentrum«

    Detailed directions TZ2 and TZ10
    © Fraunhofer IGCV
  • Information about the location

    Fraunhofer Institute for Casting, Composite and Processing Technology IGCV

    SIGMA Technopark, Building 10, Entrance f, first floor | Werner-von-Siemens-Straße 6 | 86159 Augsburg

    +49 (0) 821 / 90678-0 | info@igcv.fraunhofer.de

    Directions

    By car

    Coming from the A8, at the Augsburg-West junction take the B17 towards Landsberg. After approx. 14km leave the B17 at the "Messe/Universität" exit. Follow the "Friedrich-Ebert Straße" (B300) to the end, then turn left into "Haunstetter Straße" (B300) and after approx. 300m turn left again into "Werner-von-Siemens-Straße". On the right hand side you will find the SIGMA-Technopark. Parking spaces are available directly in front of the building.

    By public transport

    Take the tram line 2 (from "Königsplatz" via "Haunstetter Straße") to the stop "Sportanlage Süd P&R". There you turn right (do not cross "Haunstetter Straße") into "Werner-von-Siemens-Straße" and you will find the SIGMA-Technopark on the right hand side.

    © Fraunhofer IGCV
  • Information about the location

    Fraunhofer Institute for Casting, Composite and Processing Technology IGCV

    Location Garching: Zeppelinstr. 15 | 85748 Garching

    +49 89 289 155 03 | info@igcv.fraunhofer.de

    Directions

    From Munich

    • Follow A9 to B471 in Garching near Munich
    • On A9 take exit "Garching-Süd", then the B471 towards Garching-Süd/Ismaning/Oberschleißheim
    • Follow B471 to Zeppelinstraße, turn right onto Zeppelinstraße
    • Follow the course of Zeppelinstraße by turning left
    • The Fraunhofer IGCV is located on the left; rented parking spaces are available in the parking lot of the neighboring company in front of the institute.

     

    Directions Fraunhofer IGCV Garching
    © Fraunhofer IGCV
  • Information about the location

    Fraunhofer Insitute for Casting, Composite and Processing Technology IGCV

    Location Ludwig Bölkow Campus: Willy-Messerschmitt-Straße 1 | 82024 Taufkirchen

    +49 (0) 821 / 90678-0 | info@igcv.fraunhofer.de

    Directions

    Ludwig Bölkow Campus - from Munich Airport:

    • Take the motorway ramp to A92. (8.2 km)
    • At exit 4, drive in the direction of the A9. (400 m)
    • Keep left at the fork, follow signs to Salzburg/ Munich. (1.7 km)
    • Follow the signs to München/A9 and take the A9. (9.6 km)
    • At exit 72-Kreuz München-Nord take the A99 in the direction of Salzburg/Innsbruck. (27.8 km)
    • At exit 20-Ottobrunn drive in the direction of Höhenkirchen/ Brunnthal. (350 m)
    • Keep right at the fork, follow signs to München/Ottobrunn and take Rosenheimer Landstraße/St2078. Continue on St2078. (650 m)
    • Turn left onto Brunnthaler Str./B471. (1.1 km)
    • Turn right into Willy-Messerschmitt-Straße. (600 m)

    From Salzburg:

    • Take the A8 in the direction of Munich. (117 km)
    • At exit 94-Taufkirchen-Ost drive on Brunnthaler Str./ B471. (800 m)
    • Turn left into Willy-Messerschmitt-Straße.